The MobileAccess portfolio of in-building wireless solutions enables any organization to establish seamless cellular and complete wireless coverage within their building. MobileAccess solutions consist of three product lines, designed to address your facility’s needs with single or multiple wireless operator capabilities.

Whether you have a large or smaller building, a campus environment, or single facility, there is a MobileAccess solution that fits your needs: http://www.mobileaccess.com/xres/uploads/images/MA_grid.jpg

Flexible Multi-Service Coverage

The single operator, carrier-grade MobileAccess1000 offers reliable and robust facility-wide wireless coverage over a single, broadband infrastructure. The solution uses service-specific, chassis-based modules that automatically groom wireless signals, providing the amplification and interference mitigation necessary to maintain signal strength and quality of service in a variety of medium to large-scale environments. Up to four wireless services, including MIMO capabilities are supported on a single infrastructure.

MobileAccess1000 Benefits:

Multi-service broadband architecture accommodates up to four wireless voice and data services, eliminating the need for separate parallel networks for each service. Supports: TDMA, CDMA, WCDMA, GSM, AWS, and services such as Cellular/PCS, Paging, and iDEN.
Integrated and transparent Wi-Fi support.
Modular carrier-service packaging for easy and cost-effective addition of new voice and data services.
Higher power quad-service remote modules optimize the number of antennas required to cover open air topologies (available in both indoor and outdoor configurations).
Managed elements are housed in secure and accessible telecom closets.
Intelligent signal handling and low-loss elements ensure carrier-grade performance.
Proactive management system enables centralized monitoring and control.

Scalable Multi-Carrier Coverage

The MobileAccess2000 is a worry-free in-building wireless coverage platform, delivering multi-service, multi-operator wireless coverage over a single, broadband infrastructure. With Wire-it-OnceTM architecture, the MobileAccess2000 uses service-specific, chassis-based modules that automatically groom wireless signals, in order to maintain signal strength and quality in large-scale, multi-operator and multi-service environments. With this modularity, customers can introduce new wireless services or activate new operator services at any time without re-wiring the passive network in the ceilings.

MobileAccess2000 Benefits:

Single broadband architecture supports multiple operators and mobile services from 400 MHz to 6 GHz including, GSM, CELL, PCS, iDEN, Public Safety, AWS, 700 MHz LTE, Paging, UMTS, DCS, WMTS, and more.
Integrated and transparent Wi-Fi support.
Modular carrier-service packaging for easy and cost-effective addition of new voice and data services.
Higher power quad-service remote modules optimize the number of antennas required to cover open air topologies (available in both indoor and ourtdoor configurations).
Managed elements are housed in secure and accessible telecom closets.
Intelligent signal handling and low-loss elements ensure carrier-grade performance.
Proactive Management System enables centralized monitoring and control.

Cost-Effective Coverage with Cellular-over-LAN

The MobileAccessVE product is the first 4G LTE network architecture in-building solution to deliver cellular services over a LAN infrastructure. The MobileAccessVE solution takes advantage of existing LAN cabling for cellular signal distribution, while maintaining full Ethernet and wireless LAN capabilities. This cost-effective approach does not consume LAN capacity and minimizes the disruption and deployment costs associated with new cabling projects and conventional infrastructure solutions. Now enterprises of all sizes can adopt ubiquitous wireless coverage.

The MobileAccessVE platform is 100% transparent to WLAN equipment, enabling cellular signal coexistence alongside Ethernet signals passed through to WLAN APs. Tested and validated with the Cisco Unified Wireless Network, the VE solution provides a worry-free, plug-and-play design that uses existing CAT-5/6 cabling infrastructure to reliably distribute cellular services at a cost that is comparatively lower than conventional solutions.

Extends carrier-grade, 5-bar coverage for 2G, 3G, 4G services with MIMO.*
Reduces installation time by half, as compared with conventional solutions.
Transparently coexists alongside the LAN without impacting LAN performance.
Plug-and-play design scales cost-effectively, allowing customers to choose where new services are activated.
Aesthetically appealing VE Access Pods, looks and feels like Wi-Fi access points.
Supports connectivity to any type of operator RF capacity source.
Offers proactive end-to-end network monitoring.

* Multi-Input/Multi-Output (MIMO) is a type of smart antenna technology that uses multiple antennas at both the transmitter and receiver to improve communication performance. MIMO is required to deliver the throughput benefits of 802.11n and other 4th Generation cellular services.

Austin’s Premier Cabling Contractor provides free network wiring & cabling estimates for new construction, office relocations, office remodels, office expansions, adds moves changes, data centers, server rooms, central offices, computer rooms, enterprise, medium business, small business, demark extensions, network backbones, metro area networks, campus networks and multi-story buildings.

Services:

Austin Voice / Data Network Cabling, Wiring Install
Austin Voice /Telephone Wiring & Cabling Installation
Austin Structured Cabling Design & Implementation
Austin Cat 5, Cat 5E, Cat 6, Cat 6a, Fiber optic MM SM
Austin Sound Masking & White Noise Installation
Austin MDF & IDF wiring closet design & installation
Austin Data Center/ POS cabling/ VoIP Wiring
Austin VoIP Business phone system Installation
Austin WiFi Cisco & Ruckus /Wireless Network Install
Austin Paging System Installation / National Rollouts
Austin Building Cell Booster / Repeater Installation
Austin IT support / IT services / Network support
Austin Infrastructure wiring & cabling Termination
Austin Video cabling & wiring / Demark Extension
Austin Security Camera Installation / CCTV / IP Cameras
Austin Home Theater / Austin Sound Systems installation
Austin TV LCD HDTV Wall Mount & Projector Install
Austin Telecommunications / Austin Cabling Contractor
Austin Cable pathway, Cable tray and J-hook install
Continued Support / Service Contracts
Austin Satellite & Cable Matrix Head Ends for HDTV
Austin Cabling Contractor National Roll outs
Houston network cabling, network cabling Dallas
Voice and data cabling Texas, Austin network cabling
San Antiono voice and data cabling, network cabling San Antonio

SERVING TEXAS – AUSTIN, DALLAS, SAN ANTONIO, HOUSTON & SURROUNDING AREAS

Austin Texas and surrounding areas – voice and data cabling & Austin Texas network cabling installation, structured cabling & solutions for voice / data cabling & network wiring services, including network wiring & voice/data cable installation services for Austin, Bartlett, Bastrop, Belmont, Bertram, Blanco, Bluffton, Briggs, Buchanan Dam, Buckholts, Buda, Bulverde, Burnet, Cameron, Canyon Lake, Cedar Creek, Cedar Park, Cibolo, Coupland, Dale, Davilla, Del Valle, Dime Box, Driftwood, Dripping Springs, Elgin, Fentress, Fischer, Flatonia, Florence, Georgetown, Geronimo, Giddings, Gonzales, Granger, Harwood, Holland, Hutto, Hye, Jarrell, Johnson City, Kendalia, Kingsbury, Kingsland, Kyle, Leander, Lexington, Liberty Hill, Lincoln, Lockhart, Luling, Manchaca, Manor, Marble Falls, Marion, Martindale, Maxwell, Mc Dade, Mc Neil, Mc Queeney, Moulton, Muldoon, New Braunfels, Ottine, Paige, Pflugerville, Plum, Prairie Lea, Red Rock, Rockdale, Rogers, Rosanky, Round Mountain, Round Rock, San Antonio, San Marcos, Schertz, Schwertner, Seguin, Smithville, Spicewood, Spring Branch, Staples, Taylor, Thorndale, Thrall, Tow, Universal City, Waelder, Walburg, Weir, West Point, Wimberley.

San Antonio’s Premier Cabling Contractor provides free network wiring & cabling estimates for new construction, office relocations, office remodels, office expansions, adds moves changes, data centers, server rooms, central offices, computer rooms, enterprise, medium business, small business, demarc extensions, network backbones, metro area networks, campus networks and multi-story buildings.

Services:

San Antonio Voice / Data Network Cabling, Wiring Install
San Antonio Voice /Telephone Wiring & Cabling Installation
San Antonio Structured Cabling Design & Implementation
San Antonio Cat 5, Cat 5E, Cat 6, Cat 6a, Fiber optic MM SM
San Antonio Sound Masking & White Noise Installation
San Antonio MDF & IDF wiring closet design & installation
San Antonio Data Center/ POS cabling/ VoIP Wiring
San Antonio VoIP Business phone system Installation
San Antonio WiFi Cisco & Ruckus /Wireless Network Install
San Antonio Paging System Installation / National Rollouts
San Antonio Building Cell Booster / Repeater Installation
San Antonio IT support / IT services / Network support
San Antonio Infrastructure wiring & cabling Termination
San Antonio Video cabling & wiring / Demark Extension
San Antonio Security Camera Installation / CCTV / IP Cameras
San Antonio Home Theater / San Antonio Sound Systems installation
San Antonio TV LCD HDTV Wall Mount & Projector Install
San Antonio Telecommunications / Cabling Contractor
San Antonio Cable pathway, Cable tray and J-hook install
Continued Support / Service Contracts
San Antonio Satellite & Cable Matrix Head Ends for HDTV
Cabling Contractor National Roll outs
Houston network cabling, network cabling Dallas
Voice and data cabling Texas, Austin network cabling
San Antonio voice and data cabling, network cabling San Antonio

SERVING TEXAS – AUSTIN, DALLAS, SAN ANTONIO, HOUSTON & SURROUNDING AREAS

San Antonio Texas voice and data cabling & San Antonio network cabling installation companies offer structured cabling for solutions for voice / data cabling & network wiring services in San Antonio and surrounding areas, including network wiring & voice/data cable installation services for Adkins, Atascosa, Austin, Bandera, Bergheim, Bigfoot, Blanco, Boerne, Buda, Bulverde, Campbellton, Canyon Lake, Castroville, Center Point, Charlotte, Christine, Cibolo, Comfort, Converse, Devine, D’Hanis, Driftwood, Ecleto, Elmendorf, Falls City, Fentress, Fischer, Floresville, Geronimo, Gillett, Helotes, Hobson, Hondo, Hunt, Ingram, Jourdanton, Karnes City, Kendalia, Kenedy, Kerrville, Kingsbury, Kyle, La Coste, La Vernia, Leesville, Leming, Lytle, Macdona, Manchaca, Marion, Martindale, Maxwell, Mc Queeney, Medina, Mico, Moore, Natalia, New Braunfels, Nixon, Pandora, Panna Maria, Pearsall, Pipe Creek, Pleasanton, Poteet, Poth, Prairie Lea, Rio Medina, Saint Hedwig, San Antonio, San Marcos, Schertz, Seguin, Somerset, Spring Branch, Staples, Stockdale, Sutherland Springs, Tarpley, Universal City, Von Ormy, Waring, Wimberley, Yancey, – and surrounding areas.

In-Building Bi-Directional Cellular Amplifiers
Wilson Electronics single band “SmartTechnology” In-Building amplifiers offer exceptional performance without causing harmful interference to the cell site.

Wilson’s single band amplifiers are available for 800MHz, 800MHz iDen / Nextel, 900MHz (GSM & iDen) and 1900MHz.

Why Wilson Building Cellular Amplifier Systems
Wilson Electronics’ non down-converted bi-directional amplifiers are the most technologically advanced cellular amplifiers on the market today. Their most important feature is patented oscillation shutdown protection, which activates complete shutdown within just a few milliseconds to prevent harmful interference to cell sites. Wilson amplifiers also offer completely adjustable software-controlled automatic gain control, both on forward and reverse links, which allows the amplifiers to meet CDMA and GSM ACPR requirements. The amplifiers are invisible within CDMA and GSM systems. They also have the capability of following base station power requests which allows maintaining the full power dynamic range of the cell phone.

In Building Cellular Repeaters
An in building cellular amplifier has 3 major components. An outside antenna, amplifier and an inside antenna. The signal is received by the outside antenna from the cell site. It is then amplified and repeated to your cell phone through the inside antenna. When the phone transmits, the signal is received by the inside antenna, amplified, then repeated to the cell site via the outside antenna. Call us today for a quick and easy consultation. 800-781-8431 or go to www.cmctelco.com

Features
Systems for all US Carriers – AT&T, Sprint, T-Mobile, Verizon, US Cellular and others.
Single Band – Match with your cellular service provider in your area.
Wireless operation. No physical connection to your phone is required.
Automatic Gain Adjusting in the event of oscillation and /or overload
Automatic shutdown on overload
TIA/EIA-98-E 3.5.1 Receiver Sensitivity better than -110 dBm
CDMA/rho > .912
Allows multiple phones to be use simultaneously.
Your phone will use less battery power for longer battery life.
Two inside antennas can be used using the Wilson 2 Way Splitter

VoiceArrest Sound Masking System

The VoiceArrest™ Sound Masking System is measurably the most effective sound masking system available. Here are a few of the benefits you will enjoy as a result of new advanced technology.

Comfortable, Stress Relieving Privacy
Open office floor plans are praised for their encouragement of team building and communication. But these open-style offices can also create increased levels of stress among employees. Even low levels of noise at work reduce problem solving skills by almost 40 percent and significantly raise levels of stress over those colleagues in quiet offices. In addition to lower productivity and increased stress, these employees face the constant distraction of open office’s conversations.

The VoiceArrest™ was designed to provide acoustic comfort in this type of stressful environment. The gentle, background sound covers conversations and distractions. No more interruptions from miscellaneous office noise. And no further worries about who might overhear confidential conversations.

Through the use of four-channel sound masking technology, the VoiceArrest™ System simulates the full, yet gentle whooshing sound of a high-end HVAC system; this soft background noise is focused on the frequency of human speech and covers conversations and other distractions. The full, quadraphonic sound spreads uniformly across the coverage area, with no distortions or variances that would be distracting. This effective sound masking technology is so natural that you won’t even realize it is there.

Consistently Higher Privacy
The VoiceArrest™ Sound Masking System utilizes developments in sound technology and to provide a more consistent and effective level of privacy throughout the treated space. Through the use of Direct Field Technology, the background masking is perfectly balanced in both volume as well as frequency content.

This technology provides better privacy in two primary ways:

1. Greater levels of privacy per decibel of sound output.
2. Consistent levels of privacy throughout the entire coverage area.

Quieter, Less Intrusive Privacy
The uniform sound and consistent volume distribution of the sound delivered by the VoiceArrest™ Sound Masking System permits its operation at substantially lower sound levels than competitive systems, while still maintaining its effectiveness. Most masking systems must operate at 48 to 51 decibels of sound in order to provide acceptable privacy for most of the office space. The VoiceArrest™ system, however, is normally operated at 45 decibels under the same conditions.

The increased efficiency of the VoiceArrest™ System provides effective privacy with a quieter, less intrusive sound. Or if you require even higher levels of privacy than most offices, you can utilize the higher settings while keeping the sound output well within comfortable noise levels.

Controlled Placement of Privacy
Old plenum-based systems employ the air space above the ceiling tiles to distribute the sound masking “white” noise, but they often encounter issues in space shared by both open and closed office areas. When masking is delivered to the open area at appropriate levels, the sound also echoes into the enclosed office space and builds up to excessive levels, even if there are no masking loudspeakers above it. With the old systems, the only solution is to decrease the volume, and the privacy coverage, in the adjacent open areas.

Direct Field Technology used by the VoiceArrest™ System means the masking sound intended for the open office area is entirely restricted to the open area. There is no unwanted bleed over effect into enclosed offices or conference rooms. If masking is desired in the enclosed space, a separate zone can be provided, and its level is controlled independently.

Privacy + Paging + Music
The VoiceArrest™ Sound Masking System also has the ability to utilize the sound masking speakers to add paging and/or music. The balanced placement of our high quality speakers provides the cleanest paging system on the market without the typical “startle” effect.

Cost Effective Privacy
Businesses and other facilities are looking for a cost-effective way to provide speech privacy. Given the technological and performance advantages of the VoiceArrest™ System in comparison to the old plenum-based systems, people expect it to be more expensive. However, with new technology and efficient design, the VoiceArrest™ Sound Masking System provides state-of-the-art speech privacy at a modest, competitive price.

The VoiceArrest™ Sound Masking System is even more cost-effective when compared to other methods of increasing privacy, such as upgrading ceiling tiles, adding absorbent wall panels, or raising furniture panel heights.

If you have any question about this topic CMC Communications would be glad to answer any inquires. You can reply to this post, call 512-762-0014 or visit us at http://www.cmctelco.com . CMC Communications is based in Austin Texas and serves all major areas including Dallas, San Antonio, Houston and surrounding areas.

Another thing that is commonly over looked is the bandwidth from your ISP needed in your new office. Typically I see companies upgrade to new VOIP phones and want to use the same speed that was used before at the old office. If you have 50 new phones that use a common speed of 64KB upload speed this can cause big problems if lots of users get on the phone it can bring the network to its knees.

If you have any question about this topic CMC Communications would be glad to answer any inquires. You can reply to this post, call 512-762-0014 or visit us at http://www.cmctelco.com . CMC Communications is based in Austin Texas and serves all major areas including Dallas, San Antonio, Houston and surrounding areas.

It is still common practice to use cat3 25-pair as backbone cabling but mostly for analogue uses.

If you have any questions about this topic please reply to this posting and we would be glad to answer any inquiries. You can reply to this post, call 512-762-0014 or visit us at http://www.cmctelco.com .